Buldog - F3A

Suivez la création et la construction d'un avion F3A de A à Z
Avatar de l’utilisateur
maki
Apprenti pilote
Messages : 16
Inscription : 24 sept. 2008, 18:07
Avion : Buldog - NEW!
Moteur : Turnigy
Hélice : 22x14
Carburant : E-10S
Emetteur : mc24+JETI 2.4G
Récepteur : JETI 8 ch
Catégorie : Promotion
Fréquence : 2.4G

Buldog - F3A

Message non lu par maki »






link to my friends page. (as soon I will find out how to posti it here, "jpg is not allowed") :oops: .


Bogdan

Hi,
Sorry for writing in english, I hope that pictures will tell more than words.
I would like to introduce you project for season 2010 from Sloweina. As you will see, construction is wood based with some gfk implementations.
Project is based on older models from my friend, who is also a constructor of the model.
Construction was made in CATIA-V5, with newest implementations of the F3A models.
I hope that this thred will be useful for some excange of experience.
Here is the link to my friends page. I will try to explain each picture (as soon I will find out how to posti it here, "jpg is not allowed") :oops: .
Fell free to post your comments.
Best regards,
Bogdan
Avatar de l’utilisateur
maki
Apprenti pilote
Messages : 16
Inscription : 24 sept. 2008, 18:07
Avion : Buldog - NEW!
Moteur : Turnigy
Hélice : 22x14
Carburant : E-10S
Emetteur : mc24+JETI 2.4G
Récepteur : JETI 8 ch
Catégorie : Promotion
Fréquence : 2.4G

Re: Buldog - F3A

Message non lu par maki »

I have made link to photos on album:
basic start with side reinforcement and undercariage..
36

wooden motor mount, suitablle for elektro motors and glow or gas. It is strong enought for all.
38

basic construction of main frame
40

undercariage plate and support for LiPo's or rezervoar
41

tail section basics
42

rock solid frame for suporting other parts
45

basic parts together, big opening for acssesing cells ...
44

from top...
46
Avatar de l’utilisateur
maki
Apprenti pilote
Messages : 16
Inscription : 24 sept. 2008, 18:07
Avion : Buldog - NEW!
Moteur : Turnigy
Hélice : 22x14
Carburant : E-10S
Emetteur : mc24+JETI 2.4G
Récepteur : JETI 8 ch
Catégorie : Promotion
Fréquence : 2.4G

Re: Buldog - F3A

Message non lu par maki »

I have made an album on this forum, so now I have just made a link to the pictures. At the moment there are not all pictures which I have, but will be added soon. First two will be also - I must request it from the owner. At the moment I have some other pictures from catia which will be also posted.
Yes, you have wright. One is for me and other for my friend. He is incharge for construction and wood work's and me for cnc cutting and gfk laminates.
Pictures are in flash, but I will have it soon.
Regards
Bogdan

some first basic construction...
74

nose with spinner...
77

taill
76

pictures inside of the modell, here you can see reinforcement with styro foam top and bottom
75

model is wide so it can cower eaven gas engine with side exhaust
73
Avatar de l’utilisateur
Seb Leaute
coco chanel du F3A
Messages : 1664
Inscription : 05 sept. 2004, 17:56
Avion : eXcellium
Moteur : Adverrun XS
Hélice : 22X20
Carburant : Topfuel 5000
Emetteur : T-18 MZWC
Récepteur : R7008SB
Servos : Futaba
Catégorie : Internationale
Fréquence : 2.4
licence : 0202035
Localisation : Vendome -41-

Re: Buldog - F3A

Message non lu par Seb Leaute »

impressive job!
Les petites ailes renaudines

Comment mettre vos photos dans vos messages ??====>>>> ici
Avatar de l’utilisateur
geoffroyBelgium
Pilote Confirmé
Pilote Confirmé
Messages : 182
Inscription : 21 déc. 2008, 22:23
Avion : expérimentaux
Moteur : OS et Axi
Hélice : qui tourne
Emetteur : MC19+Jeti
Récepteur : R8 jeti
Servos : Autres
Catégorie : Nationale 2A
Fréquence : 2.4
Localisation : Liège
Contact :

Re: Buldog - F3A

Message non lu par geoffroyBelgium »

Great construction! Realy like this wooden job. I'm impatient to see the evolution of this construction.
Avatar de l’utilisateur
Steph bernard
Champion de France 2001 Nat B
Messages : 833
Inscription : 05 août 2006, 22:43
Avion : Temptation 1.0
Moteur : RCGF 32
Hélice : 20,5x10 apc et plus
Carburant : SP98
Emetteur : Royal Pro 16 2,4Ghz
Récepteur : Mlink DR9 telemetrie
Servos : Multiplex
Catégorie : Internationale
Fréquence : 2,4Ghz
Localisation : centre de la france

Re: Buldog - F3A

Message non lu par Steph bernard »

Very interesting project,

You have used a 3D CAO modeler for design. Do you try to calculate the weight of the model ?

best regards

stephane
aéromodéliste né entre le Trias et le Crétacé, 32 ans de pratique, dont 24 de F3A (presque 1/4 de siècle) plus connu sous le nom de Déconus Radotis
Avatar de l’utilisateur
Marbar
Apprenti pilote
Messages : 4
Inscription : 09 févr. 2010, 08:47
Avion : Hypershade
Moteur : AXI 5330/22
Hélice : 21x14
Fréquence : ma fréquence

Re: Buldog - F3A

Message non lu par Marbar »

Helo, everybady!
I`m builder from Buldog.
First my apologies for my bad english. Never learned!
So, yes, in CATIA V5 is easy to calculate weight. But must be construction finished.
Some things (especialy wings an stabilisators) are changed, construction is not finished yet.
All balsa breets are weighted: balsa 2mm between 20 and 22g
balsa 3mm between 30 and 35g
balsa 1,5mm between 16 and 19g
Diference in weight between fuselage 1 and 2 is only 5g!

More about buylding from my friend Bogdan!

Regards

Marko
Avatar de l’utilisateur
jclaude
Pilote Confirmé
Pilote Confirmé
Messages : 176
Inscription : 31 août 2005, 09:57
Avion : Monolog 110 - Epower
Moteur : 1820W
Hélice : 17x10
Carburant : Lipo
Emetteur : Radiomaster TX16S
Servos : Autres
Fréquence : 2.4Ghz
Localisation : Belgium
Contact :

Re: Buldog - F3A

Message non lu par jclaude »

Very interesting! I always liked multis in wood structure. Future plans maybe?

Très intéressant ! J’ai toujours aimé les multis en structure. Futurs plans peut-être ?
jclaude
Avatar de l’utilisateur
maki
Apprenti pilote
Messages : 16
Inscription : 24 sept. 2008, 18:07
Avion : Buldog - NEW!
Moteur : Turnigy
Hélice : 22x14
Carburant : E-10S
Emetteur : mc24+JETI 2.4G
Récepteur : JETI 8 ch
Catégorie : Promotion
Fréquence : 2.4G

Re: Buldog - F3A

Message non lu par maki »

As I have promissed, here are basic pictures from CATIA V5 and rest of drawings. As you can see, basic design was a little diferent then the model becomes now. Marko decided to modify geometry of wing and tail. Now they are a little more swep back.

complet 3D model view
80

side view, here is vertical stabilizer cut out from the fuselage, later was modified and cut off completly
79

another 3D view
78

here you can see proposal with MVVS 26ifs (which I was using on my ex plane :( )
81
Avatar de l’utilisateur
maki
Apprenti pilote
Messages : 16
Inscription : 24 sept. 2008, 18:07
Avion : Buldog - NEW!
Moteur : Turnigy
Hélice : 22x14
Carburant : E-10S
Emetteur : mc24+JETI 2.4G
Récepteur : JETI 8 ch
Catégorie : Promotion
Fréquence : 2.4G

Re: Buldog - F3A

Message non lu par maki »

jclaude a écrit :Very interesting! I always liked multis in wood structure. Future plans maybe?

Très intéressant ! J’ai toujours aimé les multis en structure. Futurs plans peut-être ?
Thank you jclaude for posting replays in both languages, so I can learn something French (I know that be better to wisit France :D )
Avatar de l’utilisateur
maki
Apprenti pilote
Messages : 16
Inscription : 24 sept. 2008, 18:07
Avion : Buldog - NEW!
Moteur : Turnigy
Hélice : 22x14
Carburant : E-10S
Emetteur : mc24+JETI 2.4G
Récepteur : JETI 8 ch
Catégorie : Promotion
Fréquence : 2.4G

Re: Buldog - F3A

Message non lu par maki »

Rest of the pictures from CATIA V5....

top view, with older geometry
82

construstion of the vertical stabilizer
83

here you can see unique system of tightenig the horizontal stab with one screw from the tail tip
84

and cowered with balsa
85

oposite side...
86

vertical stabilizer (old plan) now is the rudder completly cut off, and have qite wide TE
and bottom "U" cover is now made in sendwich construction balsa-styrofoam
87
Avatar de l’utilisateur
Seb Leaute
coco chanel du F3A
Messages : 1664
Inscription : 05 sept. 2004, 17:56
Avion : eXcellium
Moteur : Adverrun XS
Hélice : 22X20
Carburant : Topfuel 5000
Emetteur : T-18 MZWC
Récepteur : R7008SB
Servos : Futaba
Catégorie : Internationale
Fréquence : 2.4
licence : 0202035
Localisation : Vendome -41-

Re: Buldog - F3A

Message non lu par Seb Leaute »

Hi maki,
for direct translation in french you can put your sentences between this BBcode:

Code : Tout sélectionner

[translater=fr][/translater]
But only one sentence each times(for the moment)

I have do it for your first post.
regards
seb
Les petites ailes renaudines

Comment mettre vos photos dans vos messages ??====>>>> ici
Avatar de l’utilisateur
maki
Apprenti pilote
Messages : 16
Inscription : 24 sept. 2008, 18:07
Avion : Buldog - NEW!
Moteur : Turnigy
Hélice : 22x14
Carburant : E-10S
Emetteur : mc24+JETI 2.4G
Récepteur : JETI 8 ch
Catégorie : Promotion
Fréquence : 2.4G

Re: Buldog - F3A

Message non lu par maki »

Thank you Seb! I will use this.

Here is continuing building log.


vertical fixed tail with balsa sheets and balsa block (hollow) on the top.
()
49

here you can see how wide the rudder is. At the moment we dont decide to install any adjustement mechanism for horizontal stab.

50

and the cables are on place. It is much easyer to install it now.

51

here is cnc cuts styrofom with 1,5 mm balsa covering. They become really light weight. All cuttings was made with GMFC program.

52

upper part of the fuselage is almost ready

56

fuselage glued together, waiting just for canopy and motor cover

60

and from front

61

vertical stabilizer is ready

63

interior, extra rib was made in place between fuselage and canopy

65

here you can see very smart move to fix horizontal stabilizer with just one screw

66

and the screw

68

and the rudder is done

69

rudder with newest knowledge in design

71

While the wings start building by my friend Marko,
here is the link to previous model called "hypeshade 90" which is also a very good model for starting point.
A plan in PDF format is also awailablle for free there.


link"hypeshade 90"
Avatar de l’utilisateur
pilou17
Pilote débutant
Pilote débutant
Messages : 60
Inscription : 18 nov. 2007, 17:41
Avion : Extra 330sc Carf
Moteur : DLE222
Servos : Autres
Catégorie : Internationale
Fréquence : 2.4
licence : 0701705
Localisation : Arvert

Re: Buldog - F3A

Message non lu par pilou17 »

Hello,
Very nice Airplane.
I am sure that this plane will fly very well

See You
Pilou
Avatar de l’utilisateur
maki
Apprenti pilote
Messages : 16
Inscription : 24 sept. 2008, 18:07
Avion : Buldog - NEW!
Moteur : Turnigy
Hélice : 22x14
Carburant : E-10S
Emetteur : mc24+JETI 2.4G
Récepteur : JETI 8 ch
Catégorie : Promotion
Fréquence : 2.4G

Re: Buldog - F3A

Message non lu par maki »

After a short time out, things is going on. Marko has finished my fuselage, hrozontal stabilazer and I have manage to make a gfk canopy.
We are making some weight calculations with fuselage and tail sections. Calculations shows that model will weight from 2600-2700g. Almoast complete fuselage is only 750g, and canopy come out 116g.




88

tail section of both fuselages

89

here we have mesured the canopy, and accuracy of canopy

91

we are werry satisfied with the look and accuracy

92

it realy looks good...

93

and here is still missing some ribs inside the canopy which will be added to reinforce the canopy

94

regards,
Bogdan
Répondre